Banner Wristblade Lever Handle Bathroom Sink Faucet

Print this page

The Banner Wristblade Lever Handle Bath Faucet is ADA compliant.

The Banner Wristblade Faucet offers dual wide, flat lever handles that are easy to grasp and push or pull.


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Price

Qty

The Banner Wristblade Lever Handle Bath Faucet has a simple design that blends with your home interior.

AM4818-CH Delivers within 2 weeks $65.00

Additional Information

General Info

Wristblade Handles are flat, wide and long, providing more surface area to push or grasp.

The Banner Wristblade Lever Handle Faucet has a simple design that blends with your bathroom. The special dual handles are the jewel of this bathroom faucet. They are wide and flat and have a ceramic disk construction (washerless), making for a smooth and consistent operation. Multiple gripping options can be used with a lever handle based on your hand strength or range of motion. Each handle only requires ¼ turn from off to "full on".

This banner faucet is 4" centerset; there is a trim shield beneath the faucet and the handles (4" from the center of the hot water handle to the center of the cold water handle).

Installation Rating
Assembly is difficult, special skills may be required.
  • Complete with a grid drain.
End of Tab

Specifications

ColorChrome
Lever HandlesDual
Made InUSA
ManufacturerBanner
MaterialBrass
Model Number401-GD
WarrantyManufacturer's Limited Lifetime Warranty

Dimensions

Please Note: Measurements are approximate.

  • Centerset: 4" (the measurement from the center of one handle to the center of the other)

  • Trim: 6" L x 2" W x 1" H

Lever Handle

  • Lever Handle Length: 4.1"

  • Height of Lever from Countertop: 4.4" (at highest point)

Spout

  • Reach: 4.06" (into the sink from the center of the base)

  • Height of Spout Opening from Countertop: 1.42"

  • Height of Spout from Countertop: 2.76" (at highest point)

  • Connections: ½" - 14 NPS

Batteries/Electric No
ADA Compliance

Complies with ADA section 4.27.4 Operation. Controls and operating mechanisms shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls shall be no greater than 5 lbf (22.2 N).

Compatibility (other devices) Has standard ½" connections
End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Standard: This item may be returned within 30 days if the product is in new, resalable condition. All parts, instructions and original packaging MUST be present.