Moen® SecureMount® 1.5" Grab Bars

Moen^® SecureMount^® 1.5" diameter Grab Bars provide the first line of defense against falls!

When strategically installed in areas where balance may be challenged, such as the shower, bathtub or next to the toilet, dangerous falls can be prevented! The Moen^® SecureMount^® grab bar will help you steady yourself while getting in or out of the shower or bathtub.

The grab bars have a stainless steel core and are 1½" in diameter, making them easy to hold. The SecureMount grab bars are just 1½" from the wall, meeting ADA requirements!

The Moen^® SecureMount^® Grab Bars have a Secure Mount design, offering more flexibility when mounting the grab bar on the wall. (See the "How It Works" tab for more details)

These are excellent for a disabled bathroom that requires a handicap shower or extra support anywhere you need it.

Installation Rating

Assembly is difficult, special skills may be required.

• Due to the need to properly secure a grab bar, professional installation is recommended.
• The length of the grab bar references only the bar itself. When measuring the wall space available to install a grab bar, please include the length of the grab bar plus an additional 3" for the flanges (1.5" on each side of the bar).

Secure Mount Grab Bars

"Secure Mount" refers to the way the grab bar is attached to the stud behind the wall. The mounting piece was designed to offer more flexibility to where you can place screws to secure the grab bar.

Standard Grab Bars are designed with three holes. This often means only one screw can be used to attach the grab bar to the stud behind the wall.
Moen's patented flange design gives you more options for securing the grab bar to the stud and makes it possible to use more than one screw for installation.

If you don't have 2 studs available where you need to install the grab bar, consider the Secure Mount Hardware. These specially designed toggle bolts distribute the additional torque (pull on the grab bar) that occurs during a fall. (See the "Accessories" tab for details.)

Secure Mount Hardware:
No studs or blocking are required because a portion of the hardware is inserted so that it spreads pressure across 3½" behind the wall. If you have only one stud available for mounting the grab bar, secure one side of the grab bar to it and use the Secure Mount Hardware for the other side. If you have two studs behind the wall to secure a grab bar, you do not need the Secure Mount Hardware. (2 per package.)
AM2602C

The Secure Mount Hardware requires a 3½" clear space behind the wall (be careful that there are no wires or plumbing).