Checkered Glass Vessel Sink

This black and white checkered tempered glass vessel sink adds a bit of flash to your bathroom decor.

Designed for above counter use, this classy bowl sits stably on your counter when used with a mounting ring. Its tempered glass is thick and tough enough for everyday use. These beautiful sinks do not have holes for faucets as they are designed for use with wall or counter mounted faucets. They also do not have overflow holes.

While a vessel sink has not traditionally been considered wheelchair accessible, it certainly can be. This sink has a depth of 5.5" and requires a mounting ring of .75". To be able to reach all the way to the bottom of the sink, the vessel must be placed on a countertop that is no higher than 27.75" H, making the sink rim 34". This height of countertop will allow maneuverability and clearance under the counter as well. Care should be taken not to extend the under-sink plumbing forward more than is absolutely necessary.

If you are creating a bathroom that will suit your current or future needs, consider the following design ideas:

• Use the same height lowered counter for the rest of the bathroom.

• Explore varied counter heights in the bathroom; lower around the sink, higher elsewhere.

• The sink can also be placed on a vanity table if desired.

The sink requires accessories for installation:

1. a drain.

2. a mounting ring to hold the glass bowl above the sink. This sink is for "above counter" use only. It will not pass inspection if the bowl is recessed into the counter.

Drains, mounting rings and a decorative Bottle Trap (replaced the standard P-Trap) are shown in the "Accessories" tab.

We also show recommended faucets in the "Suggested Faucets" tab.

ADA Compliant Bathroom Sink:

• In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5. Also, the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.

• Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" deep in the toe space, which extends 9" from the floor.

• Although the counter may be at the correct height, the plumbing must be also constructed for the appropriate clearance.

Please keep in mind that in the residential setting, ADA compliance is not necessary. The ultimate test for appropriateness of counter height and vessel depth is the user's preference.

Installation Rating

Assembly is difficult, special skills may be required.

• The sink is sold without any hardware or plumbing accessories. You can find appropriate mounting rings and drains on this page.
• Requires a mounting ring and a drain for proper installation.
• Two person installation is recommended.
• Please be sure that the sink complies with your local building codes.

These accessories come in polished chrome, matte bronze, polished brass and satin nickel. Select one to match your faucet!

Polished Chrome AM4831-PC	Matte Bronze AM4831-DB	Satin Nickel AM4831-SN

The ¾" H Mounting Ring sits between the sink and the counter. It makes it easier to clean under the sink while giving the sink an elegant lift.

If your faucet doesn't already include a drain (some do, some don't), you can select one of these drains to complete the sink.

Polished Chrome AM4833-PC	Matte Bronze AM4833-DB	Satin Nickel AM4833-SN

The Push Button Umbrella Drain has a 2¾" diameter mushroom shape that fits neatly over the 1¾" drain hole. The whole piece is 7¹/8" L.

Polished Chrome AM4832-PC	Matte Bronze AM4832-DB	Polished Brass AM4832-PB	Satin Nickel AM4832-SN

The Push Button Umbrella Drain is unique in that the drain closing button is built into the 2¾" diameter mushroom shaped cover. The whole piece is 7¹/8" L.

This attractive solid brass Bottle Trap replaces the standard P-Trap for an elegant look when the pipes are exposed. The dimensions are 3.25" W x 13" L x 6" H

Polished Chrome AM4834-PC	Deco Bronze AM4834-DB	Satin Nickel AM4834-SN

Faucets need to be at least 7" H with a handle that can be reached over the bowl. There are two types of faucets that work best with vessel sinks: wall mounted and counter mounted. We offer both in a variety of ADA compliant styles.

Wall Mounted Faucets	Counter Mounted Faucets