Helpful Information
Customer Service
Resources
Email Newsletters
Kohler Dolce Vita™ Sink |
Print this page |
|
The Dolce Vita™ Sink has a unique floral shape, creating an exceptional bathroom centerpiece.
|
|
The Dolce Vita™ sink is an elegant and eye-catching fixture for your powder room or bathroom.
The Dolce Vita™ sink comes in white, black or a variety of deep and beautiful colors.
This self-rimming sink is made of cast iron and can be used with a single hole or widespread faucet that is counter mounted or wall mounted. (The sink has no holes for a faucet.)
The sink has a water depth of 4¾", making it ADA compliant (assuming that the plumbing has been properly installed).
ADA Compliant Bathroom Sink:
In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
If the counter is 34" high, then the sink can be 6.5" deep; if the counter is 33" high, the sink should be only 5.5" deep.
In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
Plan knee space at the sink to allow for a seated user, at least 36"W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.





| Brand | Dolce Vita |
|---|---|
| Color | Almond, Black, Mexican Sand, Navy, Sandbar, Sunlight, White |
| Made In | Mexico |
| Manufacturer | Kohler |
| Material | Cast Iron |
| Model Number | K2815-0, K2815-33, K2815-47, K2815-52, K2815-7, K2815-G9, K2815-y2 |
| Warranty | Manufacturer's Limited One Year Warranty |
| Dimensions |
|
| Batteries/Electric | No |
| Manufacturer Documents | |
| ADA Compliant | Complies with ADA Sinks Section 4.24.4 Depth: "Each sink shall be a maximum of 6-1/2 in (165 mm) deep." |
| Care/Washing Instructions |
|
| Professional Ratings | ASME A 112.19.1, CABO/ANSI A117.1, IAPMO/UPC, CSA B45 |