Wall Mounted Trapeze

When you need to hang onto something to help you reposition or transfer, the Wall Mounted Trapeze Handle is the solution.

The Wall Mounted Trapeze Handle accommodates different furniture or individual requirements:

• The swing arm can be moved to one of 7 locking positions. The arm is locked until you release the lock by pulling on the pull cord.

• The trapeze strap can be shortened and positioned in 5 places along the swing arm.

• The pull knob (that releases the swing arm) can be set in 5 locations and the pull string can be adjusted up higher close to the arm, or left longer close to the bed.

When the Trapeze Handle is positioned over the bed, you can reach up and grab it to help you sit up or provide support while you reposition yourself. When it is positioned at the edge of the bed, you can use it to assist with transfers.

The e2™ Trapeze Handle simulates two rungs on a ladder. This design increases your leverage when climbing up to a seated position and gives you a lot of room for hand placement.

In order to support 150 lbs of otherwise unsupported weight (that means the user can weigh up to 300 lbs), the wall structure and fastening need to be secure.

Installation Rating

Assembly is difficult, special skills may be required.

• Installation hardware is not included.

• The wall plate is mounted to the wall directly into blocking behind the wall (blocking is a horizontal reinforcement between the joists). Or, if you do not have blocking, to an exterior board that spans the joists.

• Since an exterior mount is much easier, we offer AM2099WP, which is a 20" x 20" x ¾" pre-drilled sanded, unfinished plywood plate. This is then secured to the joists and the Wall Mount Trapeze can then be secured to the plate. You can finish the plate as your decor requires by painting or wallpapering.

• In addition to professional installation, we recommend planning the installation with a physical therapist to be sure that the height adjustments are appropriate and comfortable.