Heavy Duty Mixer Lift for Base Cabinets

Never use your food processor or juicer? Change all that by
installing a Rev-A-Shelf^® Base Cabinet Lift.

If you like keeping small appliances off the counter, but don't want to be lifting them when you need them, this is your solution. The heavy duty Rev-A-Shelf^® Base Cabinet Mixer Lift raises a shelf from the base cabinet up to working height! A mixer, toaster oven or a blender can be stored in the base cabinet and brought out only when you want to use it. Simply release the locking device under the front of the shelf and pull it out.

Once you start the upward motion, the spring mechanism will do the rest. The spring mechanism can be adjusted for 3 settings: 0 to 20 lbs, 20 to 30 lbs or 30 to 60 lbs. If you decide to store a different appliance after a while, be sure to check the spring setting for the appropriate weight, or the shelf may be sluggish or fly up with too much force.

• Handles appliances up to 16.5" tall

• Attaches to a shelf of your choice. (Shelf NOT included. Please see the "Installation Rating" section below for more details.)

• Match your cabinet interior or your countertop.

• The recommended depth of the shelf is 20.5".

Installation Rating

Assembly is difficult, special skills may be required.

• Must be installed in a full base cabinet without a drawer.
• You will need to provide a your own shelf for the mixer lift. The manufacturer recommends using a shelf that is a minimum of 0.75" thick and 20.5" deep. To determine the width you will need, measure the width between the installed mounting brackets and subtract 1.25" to allow room for clearance.
• 3 different spring settings allow for positioning according to the weight to be lifted.
• Includes right and left lifting arms.