11" Kohler Oblong UnderCounter Bar Sink

Print this page

The oblong Bar Sink from Moen has an 9 inch x 12 inch x 6 inch bowl.

The oblong Bar Sink from Kohler has an 9" x 15.75" x 5.5" bowl.


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Depth

Price

Qty

The oblong Bar Sink from Moen has an 9 inch x 12 inch x 6 inch bowl.

AM3997 Delivers within 2 weeks 5.625" $343.85

Additional Information

General Info

Whether for the bar or as a food prep sink, this oblong sink brings a sophisticated look to any kitchen.

  • The bowl is 9" x 12"
  • The corners have a radius of 1.75".
  • Mix and match with other kitchen sinks.
  • The underside is fully undercoated to dampen sound and prevent condensation.
  • The recessed drain is centered.
Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)
Item # Overall Depth Inside Bowl
AM3997 10¾ x 17½ 55/8" 9 x 15¾

The ADA Compliant Kitchen Sink:

  • In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
    • If the counter is 34" high, then the sink can be 6.5" deep; if the counter is 33" high, the sink should be only 5.5" deep.
    • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
  • Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
  • Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.
  • Includes installation hardware and template.
  • Allow a minimum of 2" clearance around the sink rim for clip attachment.
  • No overflow assembly.
  • Drain fitting not included; drain opening 35/8"
End of Tab

Specifications

BrandUndertone
ColorChrome
Made InUSA
ManufacturerKohler
MaterialStainless Steel
Model NumberK3333-NA
WarrantyOne Year Limited Manufacturer's Warranty

DimensionsThe diameter of the drain opening is 35/8". (The drain fitting is not included.)
Batteries/ElectricNo
Manufacturer Documents
ADA ComplianceComplies with ADA Sinks Section 4.24.4 Depth. "Each sink shall be a maximum of 6-1/2 in (165 mm)deep."
Professional RatingsComplies with ANSI Standard A112.19.3
End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Hygienic + Restrictions: Hygienic Item - not returnable if used. If not opened- potential 30% restocking fee