12" Round Elkay Undermount Bar Sink

The 12" Round Elkay Sink is a terrific choice for the bar or as an added food preparation sink.

Whether you need a second kitchen sink at another counter level or at another location, this little sink is perfect for small jobs.

• The minimum cabinet size for this sink is 18"

• The template for the sink provides a 0.5" reveal. (A reveal is the finished, flat edge that shows within the counter cutout.)

• The bottom surface is fully undercoated to dampen sound and prevent condensation.

Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)

The ADA Compliant Kitchen Sink:

• In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
  • If the counter is 34" high, then the sink can be 6.5" deep; if the counter is 33" high, the sink should be only 5.5" deep.
  • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
• Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
• Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.

Installation Rating

Assembly is difficult, special skills may be required.

• Comes with a template and countertop mounting brackets.
• Does not include: undercounter mounting clips, fasteners or caulk.
• No overflow assembly.
• Drain fitting not included; drain opening 2"