19.5" Wide Elkay Self Rimming Kitchen Sink

Elkay Stainless Steel Self Rimming Sinks drop into the countertop!

• The minimum cabinet size for these sinks is 24"

• The floor of the sink is 'coved' with 1¾" vertical and horizontal curves. The bowl and faucet deck recess is ³/16" below the outside edge of the sink.

• The underside is fully undercoated to dampen sound and prevent condensation.

ADA Compliance:

• In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.

  • If the counter is 34" H, then the sink can be 6.5" D; if the counter is 33" H, the sink should be only 5.5" D.

  • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.

• Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.

• Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.

Installation Rating

Assembly is difficult, special skills may be required.

• Includes a U-Channel Type Mounting System
• Drain fitting not included; drain opening 3.5"

Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)

Drain Opening Locations:

3 Hole Configuration:

U-Channel Type Mounting System: