25" Wide Elkay Self Rimming Kitchen Sink

Print this page

Get more workspace with the 25 inch Elkay Stainless Steel Self Rimming Sink!

The 25" Elkay Stainless Steel Self Rimming Sink can handle big pans without a problem!


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Depth / Holes

Price

Qty

Elkay Lustertone Self Rimming Sink 25x21.25x5.5

AM3926 Delivers within 2 weeks 5.5" / 3 $799.00

AM3927 Delivers within 2 weeks 5.5" / 4 $799.00

AM3924 Delivers within 2 weeks 6" / 1 $799.00

AM3935 Delivers within 2 weeks 6" / 3 $799.00

AM3934 Delivers within 2 weeks 6.5" / 3 $799.00

AM3925 Delivers within 2 weeks 6.5" / 4 $799.00

Elkay Lustertone Self Rimming Sink 25x22x5.5

AM3932 Delivers within 2 weeks 5.5" / 3 $799.00

AM3933 Delivers within 2 weeks 5.5" / 4 $799.00

AM3930 Delivers within 2 weeks 6" / 3 $799.00

AM3931 Delivers within 2 weeks 6" / 4 $799.00

AM3928 Delivers within 2 weeks 6.5" / 3 $799.00

Additional Information

General Info

If you need a large sink, the 25" Elkay Stainless Steel Sink is for you!

  • The minimum cabinet size for these sinks is 30"

  • The floor of the sink is 'coved' with 1¾" vertical and horizontal curves.

  • The underside is fully undercoated to dampen sound and prevent condensation.

ADA Compliant Kitchen Sinks:

  • In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.

    • If the counter is 34" H, then the sink can be 6.5" D; if the counter is 33" H, the sink should be only 5.5" D.

    • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.

  • Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.

  • Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.

Installation Rating
Assembly is difficult, special skills may be required.
  • Includes a U-Channel Type Mounting System
  • Drain fitting not included; drain opening 3.5"
End of Tab

Specifications

BrandLustertone
ColorChrome
Made InUSA
ManufacturerElkay
MaterialStainless Steel
Minimum Cabinet Width30"
Model NumberLRAD2521553, LRAD2521554, LRAD2521601, LRAD2521603, LRAD2521653, LRAD2521654, LRAD2522553, LRAD2522554, LRAD2522603, LRAD2522604, LRAD2522653
WarrantyManufacturer's Limited Lifetime Warranty

Dimensions

The diameter of the drain opening on all models is 3.5". (The drain fitting is not included.)

Batteries/ElectricNo
Manufacturer Documents
ADA Compliance

Complies with ADA Sinks Section 4.24.4 Depth. "Each sink shall be a maximum of 6-1/2 in (165 mm) deep."

End of Tab

Sizes

Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)

  • All sinks marked *: The bowl is recessed 3/16" below the outside edge of the sink.

  • All sinks marked+: The sink has a 3/8" drop ledge around the bowl with a raised faucet deck.

Item # Overall Depth Inside Bowl Cutout in Countertop # of Holes Drain Position
AM3924* 25 x 21.25 6 21 x 15¾ 243/8 x 205/8 1 Off-Centered Rear
AM3925* 25 x 21.25 6.5 21 x 15¾ 243/8 x 205/8 4 Off-Centered Rear
AM3926* 25 x 21.25 5.5 21 x 15¾ 243/8 x 205/8 3 Off-Centered Rear
AM3927* 25 x 21.25 5.5 21 x 15¾ 243/8 x 205/8 4 Off-Centered Rear
AM3928+ 25 x 22 6.5 21 x 15¾ 243/8 x 213/8 3 Off-Centered Rear
AM3930+ 25 x 22 6 21 x 15¾ 243/8 x 213/8 3 Off-Centered Rear
AM3931+ 25 x 22 6 21 x 15¾ 243/8 x 213/8 4 Off-Centered Rear
AM3932+ 25 x 22 5.5 21 x 15¾ 243/8 x 213/8 3 Off-Centered Rear
AM3933+ 25 x 22 5.5 21 x 15¾ 243/8 x 213/8 4 Off-Centered Rear
AM3934* 25 x 21.25 6.5 21 x 15¾ 213/8 x 187/8 3 Off-Centered Rear
AM3935* 25 x 21.25 6 21 x 15¾ 213/8 x 187/8 3 Off-Centered Rear
End of Tab

Diagrams

Off Centered, Rear Drain Opening:

The drain is centered horizontally, and only 5 inches from the back of the sink.

Hole Configurations:

1 Hole2 Hole
This sink has 1 centered hole for the faucet.This sink has two holes 4 inches apart from each other.
3 Hole4 Hole
This sink has three holes 4 inches apart from each other.This sink has four holes, each 4 inches apart. The set of holes is off center to the right.

U-Channel Type Mounting System:

Diagram of the U-Channel Mounting System

End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Hygienic + Restrictions: Hygienic Item - not returnable if used. If not opened- potential 30% restocking fee