25" Wide Moen Single Bowl Self Rimming Sink

Print this page

Get more workspace with the 25 inch Moen Stainless Steel Self Rimming Sink!

The 25" Wide Moen Self Rimming Sink has a single bowl that is large enough for most kitchens.


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Depth / Holes

Price

Qty

Moen Excalibur Self Rimming Sink with 3 Holes

AM3942 Delivers within 2 weeks 6.5" / 3 $85.20
$71.00

AM3943 Delivers within 2 weeks 6.5" / 4 $85.20
$71.00

Additional Information

General Info

A 21.25" x 16" single bowl sink is big enough for most families!

  • The minimum cabinet size for these sinks is 30".
  • The ledge around the sink is 1.88" except the back edge where the faucet is mounted. That rim edge is 4".
  • The sink ledge is available with 3 (Item # AM2942) or 4 (Item # AM2943) mounting holes that are 1.5" diameter and 4" on center.
  • The underside is fully undercoated to dampen sound and prevent condensation.
  • The exposed surface is polished to a lustrous satin tone finish.
Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)
Item #OverallDepthInside BowlCutout in Countertop# of HolesDrain Position
AM394225 x 226.521.25 x 16243/8 x 213/83Centered
AM394325 x 226.521.25 x 16243/8 x 213/84Centered

ADA Compliant Kitchen Sinks:

  • In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
    • If the counter is 34" H, then the sink can be 6.5" D; if the counter is 33" H, the sink should be only 5.5" D.
    • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
  • Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
  • Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.
Installation Rating
Assembly is difficult, special skills may be required.
  • Includes a U-Channel Type Mounting System and all the necessary mounting hardware.
  • Drain fitting not included; drain opening 3.5"
End of Tab

Specifications

BrandExcalibur
ColorChrome
Made InUSA
ManufacturerMoen
MaterialStainless Steel
Model Number22831, 22832
Warranty5 Year Limited Manufacturer's Warranty

DimensionsThe diameter of the drain opening on all models is 3.5". (The drain fitting is not included.)
Batteries/ElectricNo
Manufacturer Documents
ADA Compliance

Complies with ADA Sinks Section 4.24.4 Depth. "Each sink shall be a maximum of 6-1/2 in (165 mm) deep."

Professional RatingsMeets ASME A112.19.3 and ANSI A117.1
End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Hygienic + Restrictions: Hygienic Item - not returnable if used. If not opened- potential 30% restocking fee