33" Wide Kindred Self Rimming Double Bowl ADA Compliant Kitchen Sink

This Kindred 33" Double Bowl Sink is elegant in any kitchen!

This double bowl sink has a clean design with smooth, rounded edges. Rolled edges strengthen the rim and protect your hands during installation. Installation rails are created as the bowls are pressed.

• There are no seams.

• Pads cover the bottom of the bowl to insulate from noise and vibration.

ADA Compliant Sinks:

• In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
  • If the counter is 34" high, then the sink can be 6.5" deep; if the counter is 33" high, the sink should be only 5.5" deep.
  • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
• Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" deep in the toe space, which extends 9" from the floor.
• Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.

Installation Rating

Assembly is difficult, special skills may be required.

• Pre-attached clips for easy installation
• Drain fitting not included; drain opening 3.5"
• The minimum cabinet size for these double bowl sinks is 36"

Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)