33" Wide Kindred Self Rimming Double Bowl Kitchen Sink

Email a Friend
Print this page

33 inch Wide Kindred Self Rimmed Double Bowl Kitchen Sinks are ADA compliant.

33" Wide Kindred Self Rimming Double Bowl Kitchen Sinks have smooth, rolled edges.


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Depth / Holes

Price

Qty

33 inch Wide Kindred Self Rimmed Double Bowl Sinks with 5 holes

AM3972 Delivers within 2 weeks 6" / 5 $61.00

AM3973 Delivers within 2 weeks 6.5" / 3 $84.00

Additional Information

General Info

Kindred 33" Double Bowl Sinks do not have any seams!

The Kindred sinks are manufactured using a unique one-step process that results in a smooth product with no unsightly grind marks or welds. Rolled edges strengthen the rim and protect your hands during installation. Installation rails are created as the bowls are pressed. There are no seams. Pads cover the bottom of the bowl to insulate from noise and vibration.

ADA Compliance:

  • In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
    • If the counter is 34" high, then the sink can be 6.5" deep; if the counter is 33" high, the sink should be only 5.5" deep.
    • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
  • Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" deep in the toe space, which extends 9" from the floor.
  • Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.
Installation Rating
Assembly is difficult, special skills may be required.
  • Pre-attached clips for easy installation
  • Drain fitting not included; drain opening 3.5"
  • The minimum cabinet size for these double bowl sinks is 36"
End of Tab

Specifications

ColorChrome
Depth6", 6.5"
Drain PositionCentered
Faucet Holes3, 5
FinishSatin
Front to Back Measurement22 inches
Gauge22
Height0.00
Left to Right33"
List Price61.00, 84.00
Made InSwitzerland
ManufacturerKindred
MaterialStainless Steel
Model NumberDS605LBX, DS653BX
Sale Price0.00
WarrantyManufacturer's Limited Lifetime Warranty
Width0.00

Dimensions

The diameter of the drain opening on all models is 3.5". (The drain fitting is not included.)

Batteries/Electric No
ADA Compliance

Complies with ADA Sinks Section 4.24.4 Depth.

"Each sink shall be a maximum of 6-1/2 in (165 mm) deep."

End of Tab

Sizes

Please Note: All measurement numbers are in this sequence: (side to side) x (front to back)

Item # Overall Depth Inside Bowl Cutout in Countertop # of Holes Drain Position
AM3972 33 x 22 6.0 14 x 15.5 32.25 x 21.25 5 Centered
AM3973 33 x 22 6.5 14 x 15.5 32.25 x 21.25 3 Centered
End of Tab

Diagrams

Hole & Drain Configurations:

3 Holes with Centered Drains

5 Holes with Centered Drains

The drains are centered horizontally and vertically. This sink has three holes centered at the back of the sink.

The drains are centered horizontally and vertically. This sink has five holes for faucets, handles and accessories.

End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Hygienic + Restrictions: Hygienic Item - not returnable if used. If not opened- potential 30% restocking fee