33" Wide Moen Double Bowl Self Rimming Sink

Print this page

A double bowled sink is flexible to different kinds of tasks.

The 33" Wide Moen Double Sink two equal sized bowls to handle all your washing needs.


Read Review(s) in the Tab Below

Purchase Information

 

Description

Item #

Availability

Depth

Price

Qty

33 inch Wide Moen Double Bowl Self Rimming Sink

AM3980 Delivers within 2 weeks 6.5" $93.35
$77.79

Additional Information

General Info

Two equal bowls are great for washing in one and rinsing or drying in the other.

  • Both bowls are: 14 x 16" x 61/2
  • The ledge is 17/8" around the sink except for the rear panel where the fixtures are mounted. That rear ledge is 4".
  • The sink ledge has 3 mounting holes that are 11/2" diameter and 4" on center.
  • The underside is fully undercoated to dampen sound and prevent condensation.
  • The exposed surface is polished to a lustrous satin tone finish.
Please Note: All measurement numbers are in this sequence: (side to side) x (front to back) x depth
Item # Overall Left Bowl Right Bowl Cutout in Countertop # of Holes Drain Position
AM3980 33 x 22 14 x 16 x 61/2 14 x 16 x 61/2 323/8 x 213/8 3 Centered

ADA Compliant Kitchen Sinks:

  • In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
    • If the counter is 34" H, then the sink can be 6.5" D; if the counter is 33" H, the sink should be only 5.5" D.
    • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
  • Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
  • Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.
Installation Rating
Assembly is difficult, special skills may be required.
  • Includes all the necessary mounting hardware.
  • Drain fitting not included; drain openings are both 3.5"
End of Tab

Specifications

BrandExcalibur
ColorChrome
Made InUSA
ManufacturerMoen
MaterialStainless Steel
Model Number22826
Warranty5 Year Limited Manufacturer's Warranty

DimensionsThe diameter of the drain opening on all models is 3.5". (The drain fitting is not included.)
Batteries/ElectricNo
Manufacturer Documents
ADA ComplianceComplies with ADA Sinks Section 4.24.4 Depth. "Each sink shall be a maximum of 6-1/2 in (165 mm) deep."
Professional RatingsMeets ASME A112.19.3 and ANSI A117.1
End of Tab

Review

End of Tab


Availability

Delivers within 2 weeks: This item ships directly from the manufacturer. Delivery is usually within two weeks.

Return Policy

Hygienic + Restrictions: Hygienic Item - not returnable if used. If not opened- potential 30% restocking fee