33" Wide Moen Double Bowl Self Rimming Sink

Two equal bowls are great for washing in one and rinsing or drying in the other.

• Both bowls are: 14 x 16" x 5½
• The ledge around the sink is 1⁷/8" except the back edge where the faucet is mounted. That rim edge is 4¹/8".
• The sink ledge has 4 mounting holes that are 1½" diameter and 4" on center.
• The drain openings are 3½", off centered to the rear of the bowls
• The underside is fully undercoated to dampen sound and prevent condensation.
• The exposed surface is polished to a lustrous satin tone finish.

ADA Compliant Kitchen Sinks:

• In order for a sink to meet ADA compliance, the depth cannot be greater than 6.5". But that is only part of the picture: the available clearance under the sink must be at least 27" high to accommodate a person in a seated position.
  • If the counter is 34" H, then the sink can be 6.5" D; if the counter is 33" H, the sink should be only 5.5" D.
  • In the residential setting, the ultimate test for appropriateness of depth is the user's preference.
• Plan knee space at the sink to allow for a seated user, at least 36" W x 27" H x 8" D, increasing to 17" D in the toe space, which extends 9" from the floor.
• Although the sink may be of the correct depth, the plumbing must be also constructed for the appropriate clearance.

Installation Rating

Assembly is difficult, special skills may be required.

• Includes all the necessary mounting hardware.
• Drain fitting not included; drain openings are both 3.5"